Sekonic L-398A STUDIO DELUXE III Analog Light Meter - L-398A

Sekonic
SE-L-398A
EAN 4962294011352
Bestel
  • Beschrijving
  • Meer

Sekonic L-398A STUDIO DELUXE III Analog Light Meter

Sekonic Studio Delux III Analog Light Meter L-398A
• SKU 401-399
• Sensor: Amorphous Photo
• Measuring System:
Exposure Meter
Incident light: Swivel head, lumidisc removable
Reflected light: Removable, 30 deg. with lumigrid
• Measuring Modes (Ambient Light): T priority, F priority, CINE (f/s priority), FC
• Measuring Range at ISO100 (Ambient Incident Light): EV4 to EV17
• Measuring Range ISO100 (Ambient Reflected Light): EV9 to EV17
• ISO Range: ISO 6 to ISO 12,000
Aperture Range (Ambient Light): F0.7 to F128 in 1, 1/3 step
• Shutter Speeds Range (Ambient Light): 60s to 1/8,000s in 1 step
• Frame Rate Range (Ambient Light): 8, 18, 24, 64, 128
• EV Range (Ambient Light): EV1 to EV20
• Memory: Yes (1 memory with indicator)
• Operating Temperature: 0 deg. C to 40 deg. C
• Storage Temperature: -20 deg. C to 60 deg. C
• No battery (amorphous sensor)
• Product Weight (kg): 0.18
• Product Height (cm): 3.4
• Product Length (cm): 11.2
• Product Width (cm): 5.8

Sekonic L-398A Pure analog experience, the meter needle and exposure dial system gives you all reading combinations at a single glance. And because it uses an amorphous photocell that generates its own power, there is no need for a battery.

Sekonic STUDIO DELUXE III Analog Light Meter L-398A
• Instant reading of full range of aperture/shutter combinations
• Amorphous photosensor eliminates need for batteries
• Swivel Head to position incident dome and maintain full view of display
• Continuous reading plus needle lock for easy and accurate readings
• Lumidisc for adjusting illumination contrast and measuring illumination intensity
• Lumigrid for measuring reflected light (30 degrees light receiving angle)
• Memory pointer retains prior reading

• Sekonic L-398A in the box:
Operating Manual
Strap
Soft Case
Lumisphere (attached to the meter)
Lumidisc
Lumigrid
High-slide

• Downloadable from Sekonic website:br> Operating Manualbr> Limited 1-Year Warranty with 2-Year Extension upon Online Registration (US only)

The Sekonic L-398A's swivel head allows you to hold down the metering button and "walk the set" to check light levels. Release the button, and the needle locks down the meter's analog display needle for easy-to-read exposure calculations. Exposures are displayed for both still and cine applications.

Incident measurements can be taken with the over 180-degree Lumisphere for general readings of three-dimensional objects, or with the Lumi selective area readings, measuring the lighting ratios between highlights and shadow areas or light falling on flat-field objects such as artwork, measurements outdoors or under bright studio lights.

For reflected readings, a flat Lumigrid replaces the Lumisphere. If you plan on shooting with a fixed ISO and shutter speed, an optional Slide Set (Direct Reading Slides) that make it easier to take readings in fast-paced shooting scenarios. The Sekonic L-398A Studio Deluxe III makes an ideal prime or back-up meter for still or motion picture shooters.

Gerelateerde Producten